| Sub Category | U-Anchor |
| Color | Default White* |
| Width | 11.75'' |
| Length | 11.75'' |
| Ratings | Shear: 4000 lbs
Tension: 3000 lbs |
| Advantages | Lightweight: 24 oz. (680 grams).
Fast installation, approximate rate of 12 per man hour.
Installs on any surface from flat to vertical. |
| Box Weight | Approx. 23 lbs |
| Plate Fastener Hole Diameter | 17/64" (8 holes) |
| Plate Fastener Hole Pattern | 4-1/8'' Diameter |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Plate Outer Diameter? | 5-1/2" |
| Full Pallet Quantity | 35 boxes |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved. |
| U-Anchor Attachment | The U2600-APP is attached by fastening through the roofing assembly into the structural decking with 2-8 approved fasteners. Depending on the roofing manufacturer's requirements, 1 or 2 plies of membrane may be required. The membrane is then torched down per the roofing manufacturer's specified methods. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing. |
| Pallet Dimensions | 48'' x 40'' x 47'' |
| Individual Weight | Approx. 2 lbs |
| Fastner Material Type | 304 Stainless Steel |
| Full Box Quantity | 10 units |
| Box Dimensions | 17'' x 17'' x 5'' |
| FM Approved | Yes |
