| Sub Category | U-Anchor |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved. |
| Ratings | Shear: Pending
Tension: Pending |
| Advantages | Lightweight: 5 oz. (142 grams).
Installs quickly, approximately rate of 12 per man hour.
Installs on any surface from flat to vertical. |
| Plate Fastener Hole Diameter | 17/64" (12 holes) |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Plate Outer Diameter? | 11.08" x 5.47" |
| Fastner Material Type | 304 Stainless Steel |
| Full Pallet Quantity | 40 boxes |
| Color | Default White* |
| Width | 11.75'' |
| Length | 17.5'' |
| U-Anchor Attachment | The U3800-Coatings is attached by fastening through the roofing assembly into the structural decking with 2-12 approved fasteners. Depending on the roofing manufacturer's requirements, the reinforcement type may vary, thereby changing the method of installation. Consult the coating manufacturer for proper application instructions. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing. |
| Pallet Dimensions | 48'' x 40'' x 40'' |
| Individual Weight | Approx. 1 lb |
| Full Box Quantity | 10 units |
| Box Dimensions | 18'' x 13'' x 11'' |
| Box Weight | Approx. 10 lbs |
