| Sub Category | U-Anchor |
| Box Weight | Approx. 18 lbs |
| Plate Fastener Hole Diameter | 17/64" (12 holes) |
| Fastener Hole Diameter | 17/64″ (12 holes) |
| Fastner Material Type | 304 Stainless Steel |
| Full Pallet Quantity | 35 boxes |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to
approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved. |
| U-Anchor Attachment | The U3200-Plate is attached by fastening through the roofing assembly into the structural decking with 2-12 approved fasteners. The U3200-Plate is then flashed using the manufacturer's recommended method. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing. |
| Pallet Dimensions | 48'' x 40'' x 42'' |
| Individual Weight | Approx. 0.8 lbs |
| Full Box Quantity | 20 units |
| Plate Dimensions | 11.08″ x 5.47″ |
| Fastener | 3/8″-16 x 1.5″ Bolt - 304 Stainless Steel |
| Advantages | Lightweight: 4 oz. (113 grams).
Installs in less than 5 minutes. |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Plate Outer Diameter? | 11.08" x 5.47" |
| Box Dimensions | 18'' x 13'' x 5'' |
| Ratings | Shear: 1800 lbs
Tension: 1800 lbs |
