| Sub Category | U-Anchor |
| Individual Weight | Approx. 0.75 lbs |
| Full Box Quantity | 10 units |
| Plate Fastener Hole Diameter | 17/64" (8 holes) |
| Plate Fastener Hole Pattern | 4-1/8'' Diameter |
| Advantages | Extremely strong and lightweight.
Fast installation, approximate rate of 12 per man hour.
Installs on any surface from flat to vertical. |
| Box Weight | Approx. 10 lbs |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Plate Outer Diameter? | 5-1/2" |
| Fastner Material Type | 304 Stainless Steel |
| Full Pallet Quantity | 50 boxes |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved. |
| U-Anchor Attachment | The U2400-KEE is attached by fastening through the roofing assembly into the structural decking with 2-8 approved fasteners. The membrane cover is then hot air welded around the perimeter to the roof membrane. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing. |
| Pallet Dimensions | 48'' x 40'' x 67'' |
| Box Dimensions | 13'' x 11'' x 13'' |
| Color | Default White* |
| Width | 11.75'' |
| Length | 11.75'' |
| Ratings | Shear: 4000 lbs
Tension: 3000 lbs |
| FM Approved | Yes |
