Product Details
| Property | Value |
|---|---|
| Sub Category | U-Anchor |
| Color | Default White* |
| Width | 11.75'' |
| Length | 17.5'' |
| Advantages | Lightweight: 24 oz. (680 grams). Fast installation, approximate rate of 12 per man hour. Installs on low-slope roofs. |
| Box Weight | Approx. 25 lbs |
| Plate Outer Diameter? | 11.08" x 5.47" |
| Fastner Material Type | 304 Stainless Steel |
| Full Pallet Quantity | 40 boxes |
| Ratings | Shear: Pending Tension: Pending |
| Plate Fastener Hole Diameter | 17/64" (12 holes) |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved. |
| U-Anchor Attachment | The U3600-SBS Torch is attached by fastening through the roofing assembly into the structural decking with 2-12 approved fasteners. Depending on the roofing manufacturer�s requirements, 1 or 2 plies of membrane may be required. The membrane is then torched down per the roofing manufacturer�s specified methods. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing. |
| Pallet Dimensions | 48'' x 40'' x 40'' |
| Individual Weight | Approx. 2.5 lbs |
| Full Box Quantity | 10 units |
| Box Dimensions | 18'' x 13'' x 11'' |
| FM Approved | Yes |
| Property | Value |
|---|---|
| Patents |
Product Resource download links.
