| Sub Category | U-Anchor |
| Plate Fastener Hole Diameter | 17/64" (8 holes) |
| Plate Fastener Hole Pattern | 4-1/8'' Diameter |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Pallet Dimensions | 48" x 40" x 47" |
| Individual Weight | Approx. 2 lbs |
| Full Box Quantity | 10 units |
| Advantages | Lightweight: 24 oz. (680 grams).
Fast installation, approximate rate of 12 per man hour.
Installs on low-slope roofs. |
| Color | Default White* |
| Width | 15.75'' |
| Length | 11.75'' |
| Ratings | Shear: 4000 lbs
Tension: 3000 lbs |
| Box Weight | Approx. 23 lbs |
| Plate Outer Diameter? | 5-1/2" |
| Fastner Material Type | 304 Stainless Steel |
| Full Pallet Quantity | 35 boxes |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved. |
| Box Dimensions | 17'' x 17'' x 5'' |
| U-Anchor Attachment | The U2600-SBS Torch is attached by fastening through the roofing assembly into the structural decking with 2-8 approved fasteners. Depending on the roofing manufacturer's requirements, 1 or 2 plies of membrane may be required. The membrane is then torched down per the roofing manufacturer's specified methods. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing. |
| FM Approved | Yes |
