| Sub Category | U-Anchor |
| Plate Fastener Hole Diameter | 17/64" (8 holes) |
| Ratings | Shear: 4000 lbs
Tension: 3000 lbs |
| Advantages | Lightweight: 5 oz. (142 grams).
Installs quickly, approximately rate of 12 per man hour.
Installs on any surface from flat to vertical. |
| Box Weight | Approx. 7 lbs |
| Plate Fastener Hole Pattern | 4-1/8'' Diameter |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Plate Outer Diameter? | 5-1/2" |
| Fastner Material Type | 304 Stainless Steel |
| Full Pallet Quantity | 40 boxes |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be fastened to
approximately 20-25 torque pounds. Use a calibrated torque wrench during install to ensure appropriate results are achieved. |
| U-Anchor Attachment | The U2800-Coatings is attached by fastening through the roofing assembly into the structural decking with 2-8 approved fasteners. Depending on the roofing manufacturer's requirements, the reinforcement type may vary, thereby changing the method of installation. Consult the coating manufacturer for proper application instructions. Fastener selection is dictated by the system assembly, deck type, and the project engineer. Refer to installation instructions and the specified roofing material manufacturer requirements before installing. |
| Pallet Dimensions | 48'' x 40'' x 52'' |
| Individual Weight | Approx. 0.5 lbs |
| Full Box Quantity | 10 units |
| Box Dimensions | 17'' x 17'' x 5'' |
| Color | Default White* |
| Width | 11'' |
| Length | 11.75'' |
