| Sub Category | U-Anchor |
| U-Anchor Attachment | The U2600-SBS is attached by fastening through the roofing assembly and into the structural decking with 2-8 approved fasteners, as directed by project specific engineering. Depending on the roofing manufacturer�s requirements, 1 or 2 plies of membrane may be required. The membrane flashing is adhered in place over the primed roof membrane, followed by the separator disk, per the roofing manufacturer�s specific methods.
Project-specific data is required to determine the correct type of fastener and number needed to secure each U-Anchor. An ANSI/SPRI FX-1 Pull Test is recommended to measure the pull-out resistance of fasteners included in the load path, (for example, substrate -> fasteners -> the U-Anchor -> other components.) |
| Box Dimensions | 17'' x 17'' x 5'' |
| Color | Default White* |
| Width | 11.75'' |
| Length | 11.75'' |
| Ratings | Shear: 4339 lbs
Tension: 2713 lbs |
| Advantages | Lightweight: 24 oz. (680 grams).
Fast installation, approximate rate of 12 per man hour.
Installs on any surface from flat to vertical. |
| Box Weight | Approx. 23 lbs |
| Plate Fastener Hole Diameter | 17/64" (8 holes) |
| Plate Fastener Hole Pattern | 4-1/8'' Diameter |
| Plate Material Thickness | 0.047'' (1.194mm) |
| Plate Outer Diameter? | 5-1/2" |
| Fastner Material Type | 304 Stainless Steel |
| Full Pallet Quantity | 40 boxes |
| Equipment Attachment | To securely mount your rooftop equipment to the U-Anchor, after its installed, the connection nut must be tightened to approximately 20-25 ft.-lbs.
Use a calibrated torque wrench during install to ensure appropriate results are achieved.
Refer to product documentation for detailed installation and component requirements. |
| Pallet Dimensions | 48" x 40" x 47" |
| Individual Weight | Approx. 2 lbs |
| Full Box Quantity | 10 units |
| FM Approved | Yes |
